It's certainly a fast spooling setup, should be lots of fun
Opel Speedster 2,2 Nr 1047 B207 Td04-20T Turbo
Started by
piwo
, Jan 14 2018 05:55 PM
74 replies to this topic
#62
piwo
-
-
- 180 posts
Member
Posted 19 April 2025 - 11:06 AM
Some uniballs in front suspension. Plan to 8 degrees caster and 2'
°45' camber . And some damage repair. teroson ep5055 glue.
°45' camber . And some damage repair. teroson ep5055 glue.
Edited by piwo, 19 April 2025 - 11:09 AM.
#63
piwo
-
-
- 180 posts
Member
Posted 19 April 2025 - 11:37 AM
My personal 1/4 best
https://www.youtube.com/watch?v=klBSL22cbUA
https://www.youtube.com/watch?v=klBSL22cbUA
Edited by piwo, 19 April 2025 - 11:40 AM.
#64
stevieturbo
-
-
- 122 posts
Member
- Location:cold and windy place
Posted 19 April 2025 - 04:43 PM
The billet insert could certainly be a useful repair piece for those with chassis damage there.
#65
hairy
-
-
- 6,050 posts
Moonlander
- Gender:Male
- Location:Bristol
- Interests:cars, beer, nature
Posted 21 April 2025 - 09:00 PM
You could be even faster if you stopped rolling backwards!
#66
piwo
-
-
- 180 posts
Member
Posted 22 April 2025 - 04:06 AM
1/4 12,4s it was time at 32 degrees and without ethanol and lower boost. it was maybe 300KM.
in good condition ( without rolling backwards) i think 11,... i can do.
#67
Duncan VXR
-
-
- 5,283 posts
Scary Internerd
- Gender:Male
- Location:Lincolnshire
- Interests:Anything to do with making cars faster and better than the original
Posted 24 April 2025 - 05:59 PM
Easy 11 second run with boost turned up 
Could you share any pictures on your adjustable wishbones?
Something I will be making for my project and good to get some inspiration
Thanks
DG
Could you share any pictures on your adjustable wishbones?
Something I will be making for my project and good to get some inspiration
Thanks
DG
Edited by Duncan VXR, 24 April 2025 - 06:00 PM.
#68
piwo
-
-
- 180 posts
Member
Posted 16 May 2025 - 05:21 PM
And geo with big caster. I will test if i do my personal best
#69
piwo
-
-
- 180 posts
Member
Posted 10 June 2025 - 04:38 AM
on the last track I damaged the gearbox mount. is it normal?
#70
Ivor
-
-
- 2,205 posts
Scary Internerd
- Gender:Male
- Location:west Wales
-
Interests:Sheep & Ducatis
and now bees
Posted 10 June 2025 - 05:17 AM
I'd have said not,
#71
hairy
-
-
- 6,050 posts
Moonlander
- Gender:Male
- Location:Bristol
- Interests:cars, beer, nature
Posted 10 June 2025 - 06:56 AM
Never seen that before
#72
stevieturbo
-
-
- 122 posts
Member
- Location:cold and windy place
Posted 10 June 2025 - 04:53 PM
I'd say not normal.
Are you very aggressive with gearchanges ? on/off throttle ?
Obviously standard mounts like that, could lead to lots of movement with the engine, which may or may not make things worse, than if it was all held a little tighter.
Interestingly Christian's grey drag car from Romania, one picture I seen of that area it looked like he had a steel frame of some sort as an engine mounting in that area.
#73
piwo
-
-
- 180 posts
Member
Posted 11 June 2025 - 03:56 AM
on track, on oes and 1/4 on/off throttle is standard situation.
#74
stevieturbo
-
-
- 122 posts
Member
- Location:cold and windy place
Posted 11 June 2025 - 04:51 PM
eg, this is what he has done, turbo car. Not sure what else is changed on the rear, or why this is done. But it's a substantial modification.
https://www.facebook...162882008708894
#75
stevieturbo
-
-
- 122 posts
Member
- Location:cold and windy place
Posted 12 June 2025 - 04:37 PM
Has one bolt sheared off, and then the other ripped off part of the engine/box it's mounted to ?
Or is the lower hole and bolt still functional ?
3 user(s) are reading this topic
1 members, 2 guests, 0 anonymous users
-
ciderbooze
