Any Interest In Alloy Uprights?
#41
Posted 27 November 2019 - 08:09 AM
Best is to use Eliseparts equivalent.
https://www.elisepar...brake-calipers/
#42
Posted 27 November 2019 - 08:47 AM
#43
Posted 27 November 2019 - 08:52 AM
By the way, here is tge 2 pots with 38 mm pistons
https://www.boefab.c...rake-conversion
Nice
https://apracing.com...s-o3320mm-discs
#44
Posted 27 November 2019 - 05:21 PM
By the way, here is tge 2 pots with 38 mm pistons
https://www.boefab.c...rake-conversion
Nice
https://apracing.com...s-o3320mm-discs
https://nl.part-box....s0?limit=25
#45
Posted 02 December 2019 - 08:01 PM
Can I swap to V1? dont want my car any lower and if they take the 4pots then they would work better for me.
Sorry to mess, hope that's okay
1. sford - Version 2
2. Jetdotter - Version 2
3. NOSBandit - Version 2
4. Solid 5/10 - Version 1
5. 2-20 - Version 1
6. Prallyx Version 2
7. robin Version 1
8. harboged - version 1
#46
Posted 03 December 2019 - 06:35 AM
Can I swap to V1? dont want my car any lower and if they take the 4pots then they would work better for me.
Sorry to mess, hope that's okay
1. sford - Version 2
2. Jetdotter - Version 2
3. NOSBandit - Version 2
4. Solid 5/10 - Version 1
5. 2-20 - Version 1
6. Prallyx Version 2
7. robin Version 1
8. harboged - version 1
No problems at all .
Version 1 caliper mount (same as OEM)
Version 2 caliper mounts
#47
Posted 03 December 2019 - 09:17 AM
Just to confirm, can I run standard front calipers on version 2 with no issues?
#48
Posted 03 December 2019 - 10:49 AM
Just to confirm, can I run standard front calipers on version 2 with no issues?
Yeah, here's a picture of the upright with standard caliper and disc
(Yep, not the correct caliper left/right-wise....)
#49
Posted 03 December 2019 - 11:17 AM
#50
Posted 03 December 2019 - 11:49 AM
That's one heavy disc!
10056.69 gram each, nice eh?
#51
Posted 08 January 2020 - 07:14 AM
The uprights are machined and delivered to the company doing the surface treatment. Should have them back in a couple of weeks I hope.
#52
Posted 08 January 2020 - 09:20 AM
The uprights are machined and delivered to the company doing the surface treatment. Should have them back in a couple of weeks I hope.
Great stuff! New car month for me too so all the spoiling going on! Screw you christmas!
#53
Posted 08 January 2020 - 12:43 PM
Sooner than expected ðŸ‘
#54
Posted 08 January 2020 - 06:17 PM
Sent from my SM-G935F using Tapatalk
#55
Posted 09 January 2020 - 12:03 PM
That was quick, must be enough time left to design and make the rears for the end of February as well 😂😂
Sent from my SM-G935F using Tapatalk
We´ll see about that .
#56
Posted 13 January 2020 - 10:32 PM
Is it too late to get a set of the version 1s...?
#57
Posted 14 January 2020 - 06:16 AM
Is it too late to get a set of the version 1s...?
Unfortunately yes .
#58
Posted 16 January 2020 - 09:00 PM
Great to hear, could do with these as soon as possible... Back racing early March!
#59
Posted 24 January 2020 - 06:50 AM
Just got them back from surface treatment, now all left to do is the thread inserts and then make them ready for shipping.
Planning to have the ready by next week.
I´ll contact everyone on the list with more details.
#60
Posted 27 January 2020 - 12:26 PM
Money all sent! Looking forward to receiving them now.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users