Posted 11 November 2009 - 10:05 PM
Stolen from the other thread:
From Courtenay
-Inlet manifold support bracket £40.95
-Gasket inlet manifold --> head £1.81
-Map sensor £60.00
-Inlet manifold alignment bungs x2 £36.14
-On/off boost blank £10.27
-Aux tensioner £74.85
-Belt £14.26
-Z20LET injectors £135.70
-Bosch injector plug sockets with pins x4 £38.57
-Plug socket covers x4 £0.00 (with above)
-Large cotton gauze filter, 70mm internal diameter £41.71
-Long silicone pipe for filter (300mm x 70mm) £15.33
-Alloy joiner for air filter, 70mm £4.35
-M6x80 bolts x2 £0.66
-M6x40 bolts x 5 £2.50
-M6 washers x 7 £1.61
-M8x140 bolts x2 - alternator tensioner bracket £1.12
-Fused 4 pin relay - cc pump £7.18
-Dipstick relocation bracket
-4 x bolts charger --> inlet manifold £0.85
-Oil catch tank ?
-Breather filter £19.95
-EGR blanking plate ?
-EGR cheater ?
-Jubilee clips 60-80mm variety x3 £3.45
-Jubilee clips 20-32mm variety x3 £1.48
-Loom tape
-Corsa top hose
-250mm of 3mm internal diameter silicone tube (fpr pipe) £1.22
ECU Mapping £200.00
RR £95.00
Total £858.96
Others
-Pre rad (preferably pro alloy one with twin fans) £435.00
-Duel pass mod (recommended) £100.00
-50mm grommets x2 £6.57
-Charge cooler pump - Bosch 12v £109.25
-Hose x 9m £40.00
-Jubilee clips 40-60mm variety x12 £7.45
-90 degree elbows for hose x2 (3 if dual pass) £30.00
-Y piece for hose (if dual pass) £8.00
-Straight joiners x3 (only 1 for dual pass) £3.00
-Charge cooler header tank £225.00
-Alloy joiner with offset temperature sensor socket £20.00
-Temperature sensor, for fan mod £15.00
-5 litres of coolant £14.00
Totalling about £1800.
These are prices quoted from Courtenay Sport
That's pretty much everything apart from fitting and the exhaust.
Seb