118 replies to this topic

[Crazyfrog (Fab)]

Anyone who orders any items will get a large or extra large allecotec t-shirt for FREE
will i get one if i order a rotrex ........
i need a small size

[vocky]

What do you need to safeguard the SC just the rods or do you need the springs as well? Not really looking at increasing power

the Eagle steel rods are all you need to make a strong bottom end

can't remember the power they are good for, but it's around 650 bhp

Edited by vocky, 21 July 2010 - 06:24 PM.

[Kieran B]

can i put my self down for the Rods?

[Seb.F]

Just the rods really mate, and next would be pistons for anything over 300 to be safe.

[Phear]

Only need springs if you want to up the rev limit.

[chris_uk]

you can put me down for the rods, What else do i need for 300bhp @ 7000rpm? i want it 100% safe and reliable.

Edited by chris_uk, 21 July 2010 - 07:10 PM.

[Phear]

With the M62? A smaller pulley wheel, some blower cams and probably a good deal of head work including oversized valves.

[chris_uk]

if i wanted to fit the 1mm oversized valves, do i need to do any work to the head?

[techieboy]

Yes, will need machining to suit them.

[chris_uk]

i thought i might. cheers

[The Batman]

you need pistons too for 300bhp

[vocky]

Eagle Steel Rods list ..... (minimum 10 required) 1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - 5 - 6 - 7 - 8 - 9 - 10 -

[Phear]

Eagle Steel Rods list ..... (minimum 10 required) 1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - 6 - 7 - 8 - 9 - 10 -

Edited by Phear, 22 July 2010 - 10:08 AM.

[jonnyboy]

1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - 7 - 8 - 9 - 10 -

[haggi961]

1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - haggi961 (vx220.org) 7 - 8 - 9 - 10 -

[Karo]

Only need springs if you want to up the rev limit.

And higher lift cams so you wont get any coil bind...

-Karo

[vocky]

LSJ 2.0 sc 68mm throttle body $150

[JimmyJamJerusalem]

LSJ 2.0 sc 68mm throttle body $150

LSJ 2.0 sc 68mm throttle body $150

1. JimmyJamJerusalem (added over on Z22SE)

[mandarinvx]

+1 for the LSJ throttle body

[AMOSS]

Put me down for a set of Eagle Rods too... 1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - haggi961 (vx220.org) 7 - AMOSS(vx220.org) 8 - 9 - 10 -