118 replies to this topic

[vocky]

1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - haggi961 (vx220.org) 7 - AMOSS (vx220.org) 8 - Peter (z22se.co.uk) 9 - 10 -

[JimmyJamJerusalem]

Don't forget us Eagle Rods 1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - haggi961 (vx220.org) 7 - AMOSS (vx220.org) 8 - Peter (z22se.co.uk) 9 - 10 - lSJ Throttle Bodies 1 - JimmyJamJerusalem 2 - MandarinVX

[vocky]

Eagle Steel Rods - $290 (minimum 10 required) 1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - Haggi961 (vx220.org) 7 - AMOSS (vx220.0rg) 8 - Peter (z22se) 9 - 10 - CompCams - $415 1 - luki244 - blower cams (z22se) 2 - astra22bertoneauto - Stage 3 CompCams (z22se) 3 - Blue_2.2 - Stage 3 (z22se) 4 - Atom X stage 3 (two inlets) (z22se) SuperTech spring kit - $350 1 - astra22bertoneauto (z22se) 2.0 LSJ 68mm TB - $150 1 - JJJ (vx220.org) 2 - mandarinvx (vx220.org)

[Phear]

I presume Blower Cams are the best choice for S/C engine?

[The Batman]

yup, remember to change the pistons though! they dont like the extra power very much

[haggi961]

Whats the difference between the 2.0 LSJ 68mm SC TB and the one that courtenay sport do for the SC conversion. So is it not worth getting the blower cams then joe, if im not going to change the pistons or can they still be used together? If not are there any other cams I should go for?

[The Batman]

its the same throttle body how much power do you want?

[haggi961]

As much as i can with out getting pistons really as i was going to get conrods, blower-cams and a full 3inch custom exhaust system.

[The Batman]

might aswell do pistons! you will just be living on the edge otherwise....

[haggi961]

So if i get pistons as well is that everything i need then or will i need to get valves,springs too.

[The Batman]

pistons, rods, 3" exhaust, blower cams, supercharger kit will see 300bhp

[haggi961]

Ok thanks and 300bhp sounds good.

[The Batman]

it is

[Phear]

Trouble with pistons is don't you need to get the liners bore'd out slightly? Blower cams alone aren't going to add more than 10-15bhp are they? Will need a smaller SC pulley to get to 300 where pistons are needed no?

[dtrvx]

Eagle Steel Rods - $290 (minimum 10 required) 1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - Haggi961 (vx220.org) 7 - AMOSS (vx220.0rg) 8 - Peter (z22se) 9 - 10 - CompCams - $415 1 - luki244 - blower cams (z22se) 2 - astra22bertoneauto - Stage 3 CompCams (z22se) 3 - Blue_2.2 - Stage 3 (z22se) 4 - Atom X stage 3 (two inlets) (z22se) SuperTech spring kit - $350 1 - astra22bertoneauto (z22se) 2.0 LSJ 68mm TB - $150 1 - JJJ (vx220.org) 2 - mandarinvx (vx220.org) 3- dtrvx (vx220.org)

[cthomas443]

LSJ 2.0 sc 68mm throttle body $150

Few questions.

Is this inclusive? or is postage/customs to be added as theres no mention of it? do you have a rough idea of what its likely to be if so?

[The Batman]

plus postage and tax

[G-Bob]

I'm really considering getting one of the LSJ 68mm TB's.
Someone on z22se.co.uk (don't think it was vocky) made up a plug in adapter so that there were no wires needing cut or swapped over. Must have a look and see if he's got a wiring diagram.



Correction: It was Vocky! See here

Edited by gbobm, 27 July 2010 - 02:22 PM.

[haggi961]

[quote name='dtrvx' date='27 July 2010 - 11:40 AM' timestamp='1280227213' post='1066659']
Eagle Steel Rods - $290 (minimum 10 required)
1 - Kieran (vx220.org)
2 - Chris_uk (vx220.org)
3 - _Dan_ (vx220.org)
4 - Phear (vx220.org)
5 - jonnyboy (vx220.org)
6 - Haggi961 (vx220.org)
7 - AMOSS (vx220.0rg)
8 - Peter (z22se)
9 -
10 -

CompCams - $415
1 - luki244 - blower cams (z22se)
2 - astra22bertoneauto - Stage 3 CompCams (z22se)
3 - Blue_2.2 - Stage 3 (z22se)
4 - Atom X stage 3 (two inlets) (z22se)
5 - Haggi961 - blower cams(vx220.org)

SuperTech spring kit - $350
1 - astra22bertoneauto (z22se)

2.0 LSJ 68mm TB - $150
1 - JJJ (vx220.org)
2 - mandarinvx (vx220.org)
3- dtrvx (vx220.org)

[haggi961]

Eagle Steel Rods - $290 (minimum 10 required) 1 - Kieran (vx220.org) 2 - Chris_uk (vx220.org) 3 - _Dan_ (vx220.org) 4 - Phear (vx220.org) 5 - jonnyboy (vx220.org) 6 - Haggi961 (vx220.org) 7 - AMOSS (vx220.0rg) 8 - Peter (z22se) 9 - 10 - CompCams - $415 1 - luki244 - blower cams (z22se) 2 - astra22bertoneauto - Stage 3 CompCams (z22se) 3 - Blue_2.2 - Stage 3 (z22se) 4 - Atom X stage 3 (two inlets) (z22se) 5 - Haggi961 - blower cams(vx220.org) Only getting them if i get the pistons too. SuperTech spring kit - $350 1 - astra22bertoneauto (z22se) 2.0 LSJ 68mm TB - $150 1 - JJJ (vx220.org) 2 - mandarinvx (vx220.org) 3 - dtrvx (vx220.org) Wiseco Pistons (8.9:1 and 10:1 stock or .020 overbore) = $465 (min 5 needed) 1 - Haggi961 - Wiseco Pistons 8.9:1 +0.020 (vx220.org)

Edited by haggi961, 29 July 2010 - 09:03 PM.