203 replies to this topic

[siztenboots]

just needs the clutch pedal switch wired in

[Tuneconcept.de]

RLTC6DIAW

Adjustable Traction Control (Up to 6 Cyl) + Launch Control + Digital Adjuster (TCWSSSET required)

£695

 

 

TCCLUSHIFT

Full Throttle Shift

£100

 

 

+ clutch switch       € 25,-

 

+ noise killer          € 60,-

 

 

incl. shipping & VAT 

 

€ 1.020,-

 

 

 

 

 

 

 

Edited by Tuneconcept.de, 15 October 2013 - 03:53 PM.

[CocoPops]

Tcwsset required?

[siztenboots]

Tcwsset required?

 

should already have the wheel speed sensors in the bearings , so will have to T into the ABS loom

[dw1]

RLTC6DIAW Adjustable Traction Control (Up to 6 Cyl) + Launch Control + Digital Adjuster (TCWSSSET required) £695     TCCLUSHIFT Full Throttle Shift £100     + clutch switch       25,-   + noise killer          60,-     incl. shipping & VAT    1.020,-              

Big thumbs up Martin. That is great. Now it is a question of .orgers getting the names down on the list and specifying which options you each want.

[Bargi]

just needs the clutch pedal switch wired in

 

Tubby has one doesn't it?

[Tuneconcept.de]

 

[Chris P Duck]

RLTC6DIAW Adjustable Traction Control (Up to 6 Cyl) + Launch Control + Digital Adjuster (TCWSSSET required) £695     TCCLUSHIFT Full Throttle Shift £100     + clutch switch       25,-   + noise killer          60,-     incl. shipping & VAT    1.020,-    

£862ish? Is that individual addresses or all to one place?

Edited by Chris P Duck, 15 October 2013 - 07:44 PM.

[zaff]

Still interested but would not feel confident enough to fit it myself.

Anyone know where I can get this done close to Yorkshire?

[Bill SC]

Hi,
 
I have to order for a customer here in Germany the cheapest version RLTC6A 535,- GBP
 
http://www.racelogic...control?start=6
 
 

That's great,
Going through the thread there are 10 people who have expressed interest:
Davemate
cocopops
Darwinism
the Batman
Steelic
Westkenbrit - in - all components
Zagg
Chris p duck
Dw1
Joss

It's unlikely that all 10 will remain in but we could be looking at 5+?

It looks like most people are interested in RLTC6DIA Traction control for up to 6 cylinders with launch control and digital adjuster. Which normally retails from Racelogic at £695 + VAT.

@ tuneconcept.de - can you do the same offer as before when you offered 15% off for 5-9 and 20% off 10+. That would be great and I think would get a lot of interest with that offer. If you can confirm that, we can collect people's options of model and go from there.

We using dw1's initial "interested" list above or starting fresh..?

Either way.... I'm in with all components.

1. westkenbrit - all components

[dw1]

In full credit to davemate who started this whole thread off and running it. I think the model number is the RLTC6DIA and not the W option as we don't need the wheel sensors TCWSSSET as we already have abs and sensors - however please double check your own car. 1. westkenbrit - all components 2. Dw1 - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER

Edited by dw1, 16 October 2013 - 07:42 AM.

[Bill SC]

Damn good point ref the ABS sensors DW1...!

 

1. westkenbrit - - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER + Full Throttle Shift + Clutch Switch

2. Dw1 - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER

 

[Chris P Duck]

1. westkenbrit - - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER + Full Throttle Shift + Clutch Switch 2. Dw1 - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER 3. Chris P Duck - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER

[Tuneconcept.de]

[*]Shipping incl. to individual addresses
[*]Payment in € and in advance
[*]PayPal + 1,9% fee
[/list]

 

 

 

[starman]

I'm interested in this if I can fit it myself, but I'm a bit of a numpty.  Managed to fit the Fezzasus heater last year so, looking at the gallery pics, I think I've done most of the basics like taking off the dashboard.  I'm an electronics engineer by trade, so connecting wires is no problem, but is there (or will there be) a VX specific guide on what to wire to what and where to drill holes etc.?

[Chris P Duck]

I'm interested in this if I can fit it myself, but I'm a bit of a numpty.  Managed to fit the Fezzasus heater last year so, looking at the gallery pics, I think I've done most of the basics like taking off the dashboard.  I'm an electronics engineer by trade, so connecting wires is no problem, but is there (or will there be) a VX specific guide on what to wire to what and where to drill holes etc.?

If this goes through before I move to Chester in January your welcome to pop round if it's not too far and we'll fit them both at the same time.

In terms of a wiring guide this should help.

[siztenboots]

looking at that the digital adjuster is still just analogue back to the TC Ecu, with the display run off serial data "If your Traction Control system is missing the diagnostic lead then the Digital Adjuster can be connected as above, but by omitting the RS232 serial connection it will function as a normal slip controller without any additional features." So Serial functions are used by the menu which I guess means launch control, Engine cut config , FTS , Wheel config

[starman]

Nice diagram Chris P, I think that's enough to make me think I can fit it, although the devil is always in the details!  I'm thinking this will be a project for the X-Mas hols.

 

1. westkenbrit - - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER + Full Throttle Shift + Clutch Switch 2. Dw1 - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER 3. Chris P Duck - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER

4. Starman - RLTC6DIA (Up to 6 Cyl) + Launch Control + Digital Adjuster + NOISE FILTER  

 

 

 

[Darcini]

Is it possible to have the full throttle shift but without the launch control? Would want the digital adjuster too. In theory it would save 60 quid, can Mr Tuneconcept confirm this?

[Chris P Duck]

looking at that the digital adjuster is still just analogue back to the TC Ecu

Can't see why that's a bad thing?